Filling With Salt - Electrolux ESI 600 Instruction Book

Filling with salt

Salt must be used from level 2 upward.
Only use salt specifically designed for
use in dishwasher.
All other types of salt not specifically
designed for use in dishwasher,
specifically table salt, will damage the
water softener.
Only fill with salt just before starting one of the
complete washing programmes (not the Rinse and Hold
programme). This will prevent any grains of salt or salty
water, which may have been spilled, remaining on the
bottom of the machine for any period of time, which
may cause corrosion.
To fill:
1. To fill with salt, unscrew the cap of the salt
container.
2. Pour about 1 litre of water inside the container,
or until it is full (this is necessary only before
filling with salt for the first time).
3. Then using the funnel provided, pour in the salt
until the container is full (approx. 1.5 - 1.8 kg).
Do not worry if water over flows from the unit
when filling with salt, this is quite normal.
4. Replace the cap making sure that there is no
trace of salt on the screw thread or on the
gasket.
5. Screw on the cap tightly.
The salt container will require topping up periodically.
The salt cap has a refill indicator window in the centre.
A green float is clearly visible when there is salt inside
the container, and almost disappears when the salt has
finished, (ie. every 30 - 50 washes depending on the
setting of the water softener) reminding you to add salt.
SR07
SR11
7
PFS02UK