Before Operating; To Set The Clock; Language/Weight Selection; Stop/Clear - Viking VMOS201SS Use & Care Manual

Before Operating

Before operating your new microwave oven make sure you read and under-
stand this Installation/Use and Care Manual completely.
Before the microwave oven can be used, follow these procedures:
1.Plug in the microwave oven. Close the door. The microwave oven display
will show
WELCOME PRESS CLEAR AND PRESS CLOCK
2.Touch the Stop/Clear pad.
3.Set clock.

To Set the Clock

Suppose you want to enter the correct time of day 12:30 (A.M. or P.M.).
PROCEDURE
1. Touch Timer/Clock pad and number 2 pad.
2. Enter the correct time of day by touching
the numbers in sequence.
Touch Timer/Clock pad again.
This is a 12 hour clock. If you attempt to enter an incorrect clock time,
appear in the display. Touch the Stop/Clear pad and re-enter the time.
• If the electrical power supply to your microwave oven should be interrupted,
the display will intermittently show
the power is reinstated. If this occurs during cooking, the program will be
erased. The time of day will also be erased. Simply touch Stop/Clear pad
and reset the clock for the correct time of day.
Language/ Weight Selection
The microwave oven comes set for English and U.S. Customary Unit-pounds. To
change, touch Help and the number 4 pad. Continue to touch the number 4 pad
until your choice is selected. Then touch Start/Touch On. See page 39.

Stop/Clear

Touch the Stop/Clear pad to:
1. Erase if you make a mistake during programming.
2. Cancel timer.
3. Stop the microwave oven temporarily during cooking.
4. Return the time of day to the display.
5. Cancel a program during cooking, touch twice.
will appear.
:
WELCOME PRESS CLEAR AND PRESS CLOCK
16
.
DISPLAY
ENTER TIME OF
DAY
12:30
will
ERROR
after