Controls (Integrated Badge And Prefinished Models With No Lcd); Delay Start - Fisher & Paykel DishDrawer DS603 Series User Manual

Controls
If you have a double DishDrawer®, each drawer has
its own controls and can run independently of the
other.
Power button
The button turns the DishDrawer® on or off.
Opening the drawer will automatically turn the
DishDrawer® on for 30 seconds. To end a wash
program in mid cycle, press the
water in the DishDrawer® will be pumped out.
Start/Pause button
The button starts a wash program. Press the
DishDrawer® during a wash program. When paused, wait for three beeps before opening the
drawer. Forcing the drawer open while in mid cycle may cause damage or injury.

Delay Start

The button also sets the Delay Start feature which can delay the start of a wash program
from 1 to 12 hours. This feature also satisfies Shabbat requirements if the Auto Power option is
disabled (see Option Adjustment).
To activate Delay Start
Press and hold the
1
depending on your model).
Continue holding the
2
DishDrawer® will emit audible 'beeps' as you hold the
another hour delay.
The DishDrawer® will start once the delay time has elapsed and the drawer is closed.
3
To cancel Delay Start
Press the button.
Lock button
The / button activates/deactivates the Keylock or the Childlock functions.
Keylock
The Keylock feature disables all the buttons on the DishDrawer®.
To activate, press and hold the
above the /
To cancel the Keylock feature, press and hold the
/ button disappears.
2
(Integrated badge and Prefinished models with no LCD)
button. Any
button until the light above the
button down until the desired delay time has been reached. The
(optional)
/
/
button is lit when Keylock is activated.
button to pause or restart the
button down, each beep indicates
button until you hear one beep (3 seconds). The light
/ button until the light above the
Prefinished models with no LCD
button turns orange (or purple
Integrated badge