Player Connections - Acesonic BDK-2000 User Manual

Player Connections

Audio Connections
Line Out Connections
Connect the RCA cable from the Audio L and R outputs of the BDK-2000 to the Line Ins (NOT Phono
Ins) on the stereo amplifier or TV. If using a TV that has only 1 input, only connect either the Left or Right
Channel. Under some circumstances (such as playing an MP3+G File) you can use the Audio MPX Button
to change the audio to be a mix of left and right channels (mono).
SPDIF Digital Audio
Connect either an RCA coaxial cable from SPDIF Coax Output of the BDK-2000 to the SPDIF Coax
Input of the receiver, or use an optical light pipe from the SPDIF optical out of the BDK-2000 to the Optical
in.
Video Connections
Note: Depending on the specific TV, it may be necessary to change settings in the Setup Menu for the picture to be
visible. A standard video monitor or TV hookup may be temporarily necessary in order to make those changes.
HDMI High Def
Connect the HDMI cable from the HDMI Output of the BDK-2000 to the HDMI Input of the Hi Def TV.
Component High Def
Connect the 3 RCA cables from the Component Video Outputs of the BDK-2000 to the Y, Pb, and Pr
Inputs on the High Def TV.
Standard NTSC monitor or TV
Connect the single RCA cable from the Video Output of the BDK-2000 to the Video Input on the
Standard TV.
See: Rear Panel Operations for more details.
2