Audio; Bass Management - Acesonic BDK-2000 User Manual

3) Press the Direction Buttons [▲/▼] to adjust –99 to +99 seconds.
TV Display
1) Press the Direction Buttons [▲/▼] to select "TV Display".
2) Press the ENTER Button or Direction Button [►} to select the Sub-Menu.
3) Press the Direction Buttons [▲/▼] to select "4:3 Letterbox", "4:3 Pan Scan", or "16:9".
4) Press the ENTER Button to confirm it.

Audio

1) Press the Direction Buttons [▲/▼] to select "Audio".
2) Press the ENTER Button or Direction Button [►} to confirm it.

Bass Management

Note: (Only available if 5.1 or 2.1 surround sound is active)
1) Press the Direction Buttons [▲/▼] to select "Bass Management".
2) Press the ENTER Button or Direction Button [►} to select the Sub-Menu.
3) Press the Direction Buttons [▲/▼] to select "On" or "Off".
4) Press the ENTER Button to confirm it.
Center Speaker Note: (only available if 5.1 surround sound is active)
1) Press the Direction Buttons [▲/▼] to select "Center Speaker".
2) Press the ENTER Button or Direction Button [►} to select the Sub-Menu.
3) Press the Direction Buttons [▲/▼] to select "Large" or "None".
4) Press the ENTER Button to confirm it.
Surround Speakers Note: (only available if 5.1surround sound is active)
1) Press the Direction Buttons [▲/▼] to select "Surround Speakers".
2) Press the ENTER Button or Direction Button [►} to select the Sub-Menu.
3) Press the Direction Buttons [▲/▼] to select "Large" or "None".
4) Press the ENTER Button to confirm it.
Subwoofer Note: (only available if 5.1 or 2.1 surround sound is active)
1) Press the Direction Buttons [▲/▼] to select "Subwoofer".
2) Press the ENTER Button or Direction Button [►} to select the Sub-Menu.
3) Press the Direction Buttons [▲/▼] to select "Present" or "None".
4) Press the ENTER Button to confirm it.
Test Tones
1) Press the Direction Buttons [▲/▼] to select "Test Tones".
2) Press the ENTER Button or Direction Button [►} to select the Sub-Menu.
3) Press the Direction Buttons [▲/▼] to select "On" or "Off".
4) Press the ENTER Button to confirm it.
Digital Output
1) Press the Direction Buttons [▲/▼] to select "Digital Output".
2) Press the ENTER Button or Direction Button [►} to select the Sub-Menu.
3) Press the Direction Buttons [▲/▼] to select "Off", "PCM" (Pulse Code Modulation), or "Raw".
4) Press the ENTER Button to confirm it.
Dynamic Range
1) Press the Direction Buttons [▲/▼] to select "Dynamic Range".
2) Press the ENTER Button or Direction Button [►} to select the Sub-Menu.
3) Press the Direction Buttons [▲/▼] to select "On", "Off", or "Auto".
4) Press the ENTER Button to confirm it.
Audio Output
1) Press the Direction Buttons [▲/▼] to select "Audio Output".
2) Press the ENTER Button or Direction Button [►} to select the Sub-Menu.
3) Press the Direction Buttons [▲/▼] to select "5.1 Channel", "2.1 Channel", or "2.0 Channel".
4) Press the ENTER Button to confirm it.
13