Kyocera C8100DN - Color Laser Printer Technical Reference Manual page 58

Chapter 2 Graphics Tutorial
75 dpi resolution 100 dpi resolution
(Default)
2-36
Figure 2. 36. Presentation Modes
Presentation mode = 0
X
Current point
Y
Width
Presentation mode = 1
X
Current point
Y
Width
A secondary function of the SRO command specifies the width and height of the raster
area. When a width and height are explicitly specified, any part of the raster image that
extends outside of the area is clipped.
The STR command specifies the resolution at which raster data is printed. The default
resolution is 75 dots per inch, or the equivalent of 16 physical dots for each raster-line
dot. The following figure shows how a single raster-line dot correlates to physical dots at
each of the available raster data resolutions.
Figure 2. 37. Dot Resolutions
150 dpi resolution 200 dpi resolution
The RVRD and RVCD commands print raster data in the presentation mode specified by
the SRO command and at the resolution specified by the STR command. Either com-
mand can be used. The RVRD command can only print uncompressed raster data. The
RVCD command can print uncompressed raster data, run-length encoded raster data, or
X
Y
Height
Landscape
Portrait
X
Current point
Y
Landscape
Portrait
300 dpi resolution 600 dpi resolution
Current point
Width
1200 dpi resolution