Kyocera C8100DN - Color Laser Printer Technical Reference Manual page 113

e
M5/M6/M7/M8—Host buffer size
The printing system utilizes each one buffer for its interfaces. This enables simultaneous receiving
of data from the different host computers. The FRPO M5, M6, M7, and M8 parameters determine
the ratio among the sizes allocated to these buffers. Parameters M6 and M7 are provided for option
interfaces.
For example, to allocate the buffers with size ratio of 5:1, use the following format:
!R! FRPO M3, 1; FRPO M5, 5; FRPO M6, 1; EXIT;
f
Ignored in some emulation modes.
g
Models of low-end category only.
h
A3/ledger models only.
6-13