Processor Module; Removing The Processor Module - Dell Inspiron N7110 Service Manual

Processor Module

WARNING:
Before working inside your computer, read the safety information
that shipped with your computer. For additional safety best practices information,
see the Regulatory Compliance Homepage at
www.dell.com/regulatory_compliance.
CAUTION:
Only a certified service technician should perform repairs on your
computer. Damage due to servicing that is not authorized by Dell is not covered by
your warranty.
CAUTION:
To avoid electrostatic discharge, ground yourself by using a wrist
grounding strap or by periodically touching an unpainted metal surface (such as a
connector on your computer).
CAUTION:
To help prevent damage to the system board, remove the main battery
(see "Removing the Battery" on page 15) before working inside the computer.
CAUTION:
Handle components and cards by their edges, and avoid touching pins
and contacts.

Removing the Processor Module

1 Follow the instructions in "Before You Begin" on page 9.
2 Follow the instructions from step 2 to step 15 in "Removing the System
Board" on page 69.
3 Remove the thermal cooling assembly (see "Removing the Thermal
Cooling Assembly" on page 81).
4 To loosen the ZIF socket, use a small, flat-blade screwdriver and rotate the
ZIF-socket cam screw counterclockwise until it comes to the cam stop.
21
Processor Module
85