3 Route the display cable, camera cable, and Mini-Card antenna cables
through the routing guides.
4 Connect the display cable and camera cable to the connectors on the
system board.
5 Connect the Mini-Card antenna cables to the Mini-Card(s) (see
"Replacing the Mini-Card(s)" on page 47).
6 Replace the palm-rest assembly (see "Replacing the Palm-Rest Assembly"
on page 35).
7 Replace the keyboard (see "Replacing the Keyboard" on page 29).
8 Replace the two screws that secure the display assembly to the computer
base.
9 Follow the instructions from step 4 to step 5 in "Replacing the Optical
Drive" on page 19.
10 Replace the battery (see "Replacing the Battery" on page 16).
CAUTION:
stray screws remain inside the computer. Failure to do so may result in damage to
the computer.
Display Bezel
Removing the Display Bezel
1 Follow the instructions in "Before You Begin" on page 9.
2 Remove the top cover (see "Removing the Top Cover" on page 13).
3 Remove the display assembly (see "Removing the Display Assembly" on
page 89).
CAUTION:
prevent damaging the display bezel.
4 Using your fingertips, carefully pry up the inside edge of the display bezel.
5 Remove the display bezel.
92
Display
Before turning on the computer, replace all screws and ensure that no
The display bezel is extremely fragile. Be careful when removing it to