Lexmark J110 Appletalk Manual page 2

Printing
Print materials
Supplies
Troubleshooting
Administration
Method 1 -- TCP/IP
1
Assign an IP address to the print server.
–
If you are running DHCP, your IP address is automatically assigned. Push the test
button on MarkNet print server to print a network setup page. You can find the
address under the TCP/IP heading.
–
If you are not running DHCP, you can manually assign an IP address using the
printer operator panel. Instructions for doing this can be found on page 4.
2
Type the IP address in the address bar of your browser (for example,
http://156.192.225.86).
3
When you reach the MarkNet web pages, click Configuration/AppleTalk/Advanced
Settings.
4
In the top section, make the following changes:
–
Change Type to Hb PCL emulation. (The default is LaserWriter. LaserWriter will
not work correctly with your J110 printer.)
–
Delete the Prefix and PostScript strings
–
Change Mode to RAW
5
Click Submit to save your changes.
www.lexmark.com
AppleTalk and MarkNet print servers
Lexmark J110
2