Lexmark J110 Appletalk Manual page 11

Printing
Print materials
Supplies
Troubleshooting
Administration
What shows on the Description
four indicator lights
binary 9 (for 0.75 sec), Serial error
binary 1 (for 0.75 sec),
repeat continuously. Type = Parity
www.lexmark.com
Lexmark J110
AppleTalk and MarkNet print servers
Cause and solution
Parity error occurred during serial print job.
1 Reset the print server. (The 9,1 error code
does not go away until you reset the print
server. This is to make sure you see that a
parity error occurred. To turn parity
checking off, use a utility or telnet to port
9000.)
2 Send the job again.
11