For this problem:
Paper sticks together
Transparencies, glossy
film, or photo papers stick
together
Try this solution:
If paper sticks together when moving through the sheet feeder,
try the following:
•
Make sure there is not too much paper in the sheet feeder.
Depending on the thickness of your paper, the sheet feeder
can hold up to 30 sheets of paper.
•
Make sure you are using the correct type of paper.
•
Remove paper from the sheet feeder and flex or fan the
paper.
•
When loading paper, do not force the paper down into the
printer.
Note: Humid conditions may cause some papers to stick
together.
If transparencies, glossy film, or photo papers stick together
after they exit the printer:
•
Use a transparency, glossy film, or photo paper designed for
an inkjet printer. For ordering information, see "Ordering
Supplies" on page 57.
•
Remove each transparency, glossy film, or photo paper as it
exits from the printer.
•
Load each piece of specialty media one piece at a time. For
help, see "Loading specialty media" on page 12.
47
Troubleshooting