Table of Contents
Advertisement
For this problem:
DOS print job does not
print
Old document prints with
different fonts
Printer pauses frequently
during a print job
Try this solution:
Check the following items:
•
Make sure Disable CJ1000 DOS is not checked:
1
From your printer's Control Program, click the Options
tab.
2
Make sure Disable CJ1000 DOS Printing (Enable DOS
Printing to other Printers) is not checked.
•
If you are using Windows 95, 98 make sure Spool MS-DOS
print jobs is selected:
1
Open the Printer Driver Properties folder:
a
In the Windows Printers Folder, right-click the icon for
your Lexmark printer.
b
In the sidebar menu, click Properties.
c
Choose the Details tab.
2
Click the Port Settings button.
3
Make sure Spool MS-DOS print jobs is checked.
4
Click OK.
•
If you send a second DOS print job before the first DOS
print job has finished processing, neither job will print.
Normally, a job is finished processing when the first page of
the job prints.
•
Also, make sure the Lexmark 1000 Series ColorFine is set
as your default printer driver.
When you print a document formatted for a different printer,
Windows may substitute different fonts. Line breaks and page
breaks may change also. Use the software application that
created the document to fix these problems, then save your
changes for the next time you print.
If your printer pauses frequently (every two or three lines)
during a print job, and the printed pages have alternating bands
of light and dark print, select Enable Buffer Mode from the
Options tab.
1
From the printer's Control Program, click the Options tab.
2
Make sure the Enable Buffer Mode option is checked.
43
Troubleshooting
Advertisement
Table of Contents
