Fdescription Of Control Panel; F1 Basic Controls; F2 Accessory Function Selection Controls; Table 2 Control Panel - Electrolux 534074 Instruction Manual

F DESCRIPTION OF CONTROL PANEL
The possible control panel configurations for compact rack-type dishwashers are as follows:
Described below are all the single keys and functions present in the various control panel models listed above. Some
functions are shared by all models of the range, whereas others are available only on several versions.
F1 Basic controls
On/Off
This key indicates the status of the equipment: on or off.
When the appliance is on, the key is lit.
Start at speed 1 (low speed)
This key is used to start a wash cycle at speed 1. This
speed is recommended for washing very dirty dishes.
To guarantee an adequate cleanless in the washing of
the glasses it is advised the speed 1.
Start at speed 2 (high speed)
This key is used to start a wash cycle at speed 2. This
speed is recommended for washing medium dirty or not
very dirty dishes.
When a speed is selected the corresponding key is lit.
A
B
C D
F
G
H
Q
R
O
M

Table 2 Control panel

LEGEND
A = On/Off
B = Stop
C = Start at speed 1
D = Start at speed 2
F = Prewash temperature or
machine status
G = Wash temperature
H = Boiler temperature
M = Accessory functions
O = Increase key
Q = Decrease key
R = Confirmation key
Stop
This key is used to stop a wash phase or drain/cleaning
cycle.
F2 Accessory function selection controls
Accessory functions
This key is used to access the "accessory functions"
menu which is displayed.
When activating the accessory functions menu or exe-
cuting one of these functions the corresponding light is
on.
To quit the accessory functions menu, press the acces-
sory functions key again.
After entering the accessory functions menu, the
required function can be selected by means of the
increase ("O" - Table 2) and decrease ("Q" - Table 2)
keys.
After selecting the required accessory function, it can be
started by pressing the confirm key ("R" Table 2).
31