Specifications - Onkyo HTS590 - 5.1 Channel Component Home Theater Audio System Owner's Manual

Specifications
Amplifier Section
Rated Output Power
North American (FTC):
(FL, FR, C, SL, SR) 95 watts minimum continuous power
per channel, 8 ohm loads, 2 channels
driven at 1 kHz, with a maximum total
harmonic distortion of 0.7%
(Subwoofer) 105 watts minimum continuous power
per channel, 8 ohm loads, 1 channel
driven at 80 kHz, with a maximum total
harmonic distortion of 0.7%
(FL, FR, C, SL, SR) 105 watts minimum continuous power
per channel, 6 ohm loads, 2 channels
driven at 1 kHz, with a maximum total
harmonic distortion of 0.7%
(Subwoofer) 125 watts minimum continuous power
per channel, 6 ohm loads, 1 channel
driven at 80 kHz, with a maximum total
harmonic distortion of 0.7%
×
European (IEC): 6 ch
Maximum Output Power
×
Asian (JEITA): 6 ch
180 W + 180 W (3 Ω , Front)
Dynamic Power
140 W + 140 W (4 Ω , Front)
95 W + 95 W (8 Ω , Front)
THD (Total Harmonic
Distortion) 0.9% (Power Rated)
60 (Front, 1kHz, 8 Ω )
Damping Factor
Input Sensitivity and
200 mV/ 47 k Ω (LINE)
Impedance
Output Level and
200 mV/ 470 Ω (REC OUT)
Impedance
Frequency Response 10 Hz–50 kHz/ +1 dB-3 dB (Direct mode)
Tone Control ±10 dB, 80 Hz (BASS)
±10 dB, 20 kHz (TREBLE)
Signal to Noise Ratio 100 dB (LINE, IHF-A)
6 Ω – 16 Ω
Speaker Impedance
Video Section
Input Sensitivity/Output
1 Vp-p /75 Ω (Component)
Level and Impedance
0.7 Vp-p /75 Ω (Component P
1 Vp-p /75 Ω (Composite)
Component Video
Frequency Response 5 Hz–50 MHz
Tuner Section
■ FM
Tuning Frequency
Range North American: 87.5 MHz–107.9 MHz
European: 87.50 MHz–108.00 MHz
Asian: 87.50 MHz–108.00 MHz
Stereo: 22.2 dBf (75 Ω IHF)
Usable Sensitivity
Mono: 15.2 dBf (75 Ω IHF)
Signal to Noise Ratio Stereo: 67 dB (IHF-A)
Mono: 73 dB (IHF-A)
THD Stereo: 0.5% (1 kHz)
Mono: 0.3% (1 kHz)
Frequency Response 30 Hz–15 kHz / ±1 dB
Stereo Separation 40 dB (1kHz)
■ AM
Tuning Frequency
Range North American: 530 kHz–1710 kHz
European: 522 kHz–1611 kHz
Asian:
522 kHz–1611 kHz at 9 kHz steps
530 kHz–1710 kHz at 10 kHz steps
Usable Sensitivity 300 µV
Signal to Noise Ratio 40 dB
THD 0.7%
58
110 W at 6 ohms, 1 kHz, 1ch driven
120 W at 6 ohms, 1 kHz, 1ch driven
/C , P /C )
B B R R
General
Power Supply North American: AC 120 V, 60 Hz
Australian and European:
AC 230-240 V, 50 Hz
Others: AC 120/220–240 V, 50/60 Hz
AC 220–230 V, 50/60 Hz
Power Consumption North American: 3.4 A
Australian and European: 360 W
Korean: 330 W
Worldwide: 300 W
Stand-by Power
Consumption North American: 0.1 W
European: 0.3 W
Others: 0.5 W
Dimensions
× × × ×
(W H D) 435 150
×
17-1/8" 5-7/8"
Weight North American: 8.8 kg
Others: 9.6 kg, 21.2 lbs.
■ Video Inputs
Component DVD, VIDEO1, VIDEO2
Composite DVD, VIDEO1, VIDEO2, VIDEO3
■ Video Outputs
Component MONITOR
Composite MONITOR, VIDEO1
■ Audio Inputs
Digital Inputs Optical: 2
Coaxial: 1
Analog Inputs DVD (MULTICHANNEL),VIDEO1,
VIDEO2,VIDEO3,TAPE,CD
Multichannel Inputs 6
■ Audio Outputs
Analog Outputs TAPE,VIDEO1
Subwoofer Pre Outputs 0
Speaker Outputs SP-A (FL, FR, C, SL, SR, SW) +
SP-B (L, R)
Phones 1
369 mm
×
14-1/2"
19.4 lbs.