GE NX-1710E - Single Door Control Module Installation And Start-Up Manual page 19

L 54 WEIGAND FORMAT 1 – P
OCATION
(1 segment of decimal data) This location programs the Partity Type 4 for Weigand Format 1. Available options
for this location are 0 = No Parity; 1 = Odd Parity; 2 = Even Parity. Factory default is 0.
L 55 WEIGAND FORMAT 1 – P
OCATION
(8 segments of binary data) This location tells which bits to include for the parity count; and includes the parity
bits. It is used in conjunction with Location 54 (Parity Type 4). The factory default is:
Seg 1 Seg 2
-------- --------
L 56 WEIGAND FORMAT 1 – P
OCATION
(1 segment of decimal data) This location programs the Partity Type 5 for Weigand Format 1. Available options
for this location are 0 = No Parity; 1 = Odd Parity; 2 = Even Parity. Factory default is 0.
L 57 WEIGAND FORMAT 1 – P
OCATION
(8 segments of binary data) This location tells which bits to include for the parity count; and includes the parity
bits. It is used in conjunction with Location 56 (Parity Type 5). The factory default is:
Seg 1 Seg 2
-------- --------
L 58 – 70
OCATIONS
These locations contain the programming for Weigand Format 2. Refer to the instructions for Locations 45 – 57
regarding the Bit Descriptors, Parity Types and Parity Masks 1-5. Factory defaults are in the worksheets.
L 71 - 83
OCATIONS
These locations contain the programming for Weigand Format 3. Refer to the instructions for Locations 45 – 57
regarding the Bit Descriptors, Parity Types and Parity Masks 1-5. Factory defaults are in the worksheets.
L 84 – 96
OCATIONS
These locations contain the programming for Weigand Format 4. Refer to the instructions for Locations 45 – 57
regarding the Bit Descriptors, Parity Types and Parity Masks 1-5. Factory defaults are in the worksheets.
L 97 - 109
OCATIONS
These locations contain the programming for Weigand Format 5. Refer to the instructions for Locations 45 – 57
regarding the Bit Descriptors, Parity Types and Parity Masks 1-5. Factory defaults are in the worksheets.
L 110 - 122
OCATIONS
These locations contain the programming for Weigand Format 6. Refer to the instructions for Locations 45 – 57
regarding the Bit Descriptors, Parity Types and Parity Masks 1-5. Factory defaults are in the worksheets.
L 123 - 135
OCATIONS
These locations contain the programming for Weigand Format 7. Refer to the instructions for Locations 45 – 57
regarding the Bit Descriptors, Parity Types and Parity Masks 1-5. Factory defaults are in the worksheets.
L 136 - 148
OCATIONS
These locations contain the programming for Weigand Format 8. Refer to the instructions for Locations 45 – 57
regarding the Bit Descriptors, Parity Types and Parity Masks 1-5. Factory defaults are in the worksheets.
NX-1710E Single Door Control
Seg 3 Seg 4
-------- --------
Seg 3 Seg 4
-------- --------
WEIGAND FORMAT 2 (T
WEIGAND FORMAT 3 (HID1000)
WEIGAND FORMAT 4 (H10304)
WEIGAND FORMAT 5 (40
WEIGAND FORMAT 6 (40
WEIGAND FORMAT 7 (U
WEIGAND FORMAT 8 (U
T 4
ARITY YPE
M 4
ARITY ASK
Seg 5 Seg 6
-------- --------
T 5
ARITY YPE
M 5
ARITY ASK
Seg 5 Seg 6
-------- --------
ASC 27
ECOM
/F
BIT W ACILITY CODE
/ F
BIT W O ACILITY CODE
)
NDEFINED
)
NDEFINED
Seg 7 Seg 8
-------- --------
Seg 7 Seg 8
-------- --------
)
BIT
– C 4001)
ASI
– C 4002)
ASI
19