Operating Your Wine Refrigerator
It is recommended that you installed the wine refrigerator in a place where the ambient temperature is
between 10-26℃(50- 80°F) .If the ambient temperature is above or below recommended temperatures,
the performance of the unit may be affected. For example, placing in extreme cold or hot conditions may
cause interior temperature to fluctuate. The range of 10-16℃(50-60°F )may not be reached.
The temperature may fluctuate depending on whether or not the interior light is on or off or whether the
bottles are located on the upper, middle or lower section.
How to use the Buttons on the Display Panel:
The desired temperature and light can be set by pressing the buttons on the display panel. The two
buttons on the panel - " " and " " - adjust the temperature in increments of 1° C between 8-18° C
(46-66° F). You can also turn the interior light on or off by pressing the " " button.
Care And Maintenance
Cleaning Your Wine Cooler
Unplug the wine cooler and remove any bottles.
Wash the inside of the unit with a warm water and baking soda solution consisting of approximately
2 tablespoons of baking soda to one quart of water.
Pull out the water box at the bottom and rinse.
To clean the outside of the unit, use a mild detergent and warm water.
Moving Your Wine Cooler
Remove any bottles.
Securely tape down all loose parts located inside the unit.
Turn the leveling feet up to the base in order to avoid damage.
Tape the door shut.
Be sure the wine cooler stays in an upright position during transportation.