Decorative Bay Window
Available for the UVS36 only.
When fitting the Bay Window Kit, the
original front frame/glass assembly MUST
remain in place. The Bay Window Kit is fit-
ted over the existing front glass.
Installation
1. Remove the existing louvre assembly bottom com-
plete with the hinges.
2. Remove the louvre assembly top.
3. Assembly the Bay Window Kit according to the in-
structions supplied with the kit.
4. Place the 2 pieces of ceramic refractory along the
base of the bay window. (Fig. 21)
5. Hang the bay window assembly over the existing
window frame assembly.
6. Reinstall the louvre assembly top.
7. Do not remove the existing window frame assembly.
20002211
UVS33/36 Vent-Free Heaters
Ceramic
Refractory
Bottom
Brass
Trim
Fig. 24 Bay window.
Louvre Assem-
bly Top
Bay
Window
Frame
Ceramic
Refractory
Spacers
Louvre
Assembly
Bottom
Screws
FP1195
21