UVS33/36 Vent-Free Heaters
Thermopile
Fig. 13 Remote switch wiring.
Alternate Switch Location
Remote switch can be installed on either side of the
access door. Simply mount the switch to the switch
bracket provided. Screw the bracket on either side of
the frame, lining up the screws with the pre-punched
holes. (Fig. 14)
Fig. 14 Installing remote switch bracket.
FP381
DVT access door
12/99
10
W584-9
W584-9
WIRING DIAGRAM
1/8/99 djt
11/9/99 added thermopile
FP381
Finishing
CAUTION: All joints between the finished wall
and the heater surround (top and sides) may
be sealed only with noncombustible material.
Only noncombustible material can be applied
as facing to the heater surround (the black
painted face).
When finishing the heater, never obstruct or modify the
air inlet/outlet top or bottom grilles in any manner.
Finish the wall with the material of your choice. Main-
tain minimum clearances when installing a combustible
mantel or other combustible projection.
20002211