Advertisement
9.
Configure the Default Gateway address for the phone by using the following command sequence.
Click the "Settings" button on the phone
Press the (1) button, or move cursor to "1. Network Configuration" using [Next]/[Prev] soft keys, and press
the [OK ] soft key.
Press the (4) button, or move cursor to "4. Default Gateway"" using [Next]/[Prev] soft keys, and press the
[OK ] soft key.
Input the Default Gateway address using the keypad
- Press the asterisk ('*') button to input dot ('.').
- Press [Clr ] soft key to delete all characters.
- Press [ß] soft key to delete the character in front of cursor.
- The Default Gateway can be changed only under the 'Static' mode, and not in the 'DHCP' mode.
Press the [OK] softkey
10.
Configure the Call Server Address for the phone by using the following command sequence.
Click the "Settings" button on the phone
Press the (2) button, or move cursor to "2. VoIP Configuration" using [Next]/[Prev] soft keys, and press the
[OK ] soft key.
Press the (1) button, or move cursor to "1. Call Server Address" using [Next]/[Prev] soft keys, and press
the [OK ] soft key.
Input the Call Server address using the keypad
- 68.165.105.130 (SNVL), 64.2.21.61 (SNJS) or 68.165.105.160 (SNVL2)
- Press the asterisk ('*') button to input dot ('.').
- Press [Clr ] soft key to delete all characters.
- Press [ß] soft key to delete the character in front of cursor.
Press the [OK] softkey
16
LG IP Phone Configuration – Manual Method
Covad Confidential
Advertisement
