ActionTec 56K PCI Pro User Manual page 8

56k v.90 pci voice/fax windows modem

Table of Contents

5. Firmly but gently insert the modem into the available PCI expansion slot. En-

sure that the card is seated properly before securing it with the screw removed in

Step 4, as shown in the following diagram:

6. Put the chassis cover back on the computer.

7. Be sure that all power switches are in the OFF position, then reconnect the

power cables to the computer and its peripherals.

8. Connect the telephone line cable to the Line (Telco) jack as shown in Figure 7.

9. Turn on the computer and proceed to the following sections to configure your

modem to the operating system you are using.

Figure 3: Installing The Modem

Table of Contents