3-3.
ORNAMENTAL PLATE (LOWER) ASSY
The lower part of the back side
3-4.
MAIN ASSY
Please open the lower side of case assy
a little up and down.
three tapping screws
Please draw out main assy to the half
noting that KEY FLEXIBLE board does not stretch
in the direction of the arrow.
Please insert paper and the film, etc.
in the space of case assy not to be damaged
of the display side of INK(indikation) element assy.
screw (M1.4)
two claws
two screws (M1.4)
case assy
back side
ornamental plate (lower) assy
claw
connector (CN801)
spacer (CON_key)
KEY FLEXIBLE board
Please draw out main assy
from case assy in the direction
of the arrow completely
after removing the connector (CN801).
PRS-505
7