Case Rear Assy - Sony PRS-T1 Service Manual

PRS-T1
Note: Follow the disassembly procedure in the numerical order given.
2-2.

CASE REAR ASSY

JIG
When disassembling the set, use the following jig.
Part No. 9-913-402-33 Tool for Disassembly
Left side:
case rear assy
case front assy
3 Insert the jig in the gap between case
rear assy and case front assy.
Then slide it to arrow direction to remove
claws of case rear assy.
Note: Please spread a sheet under a
unit not to injure case front.
7 case rear assy
5 five claws
6
– Rear bottom view –
4
4 five claws
– Rear bottom view –
4 five claws
case rear assy
Top side:
case front assy
1 Insert the jig in the gap between case
rear assy and case front assy.
Then slide it to arrow direction to remove
claws of case rear assy.
2 four claws
Right side: case rear assy
case front assy
3 Insert the jig in the gap between case
rear assy and case front assy.
Then slide it to arrow direction to remove
claws of case rear assy.