PRS-505
•
This set can be disassembled in the order shown below.
3-1.
DISASSEMBLY FLOW
Note 1: The process described in
Note 2: Without completing the process described in
Note 3: Please refer to SERVICING NOTES "REMOVING/ATTACHING THE SOFT COVER" (page 4).
SET
3-2. ORNAMENTAL PLATE (UPPER) ASSY,
PLATE (CASE-UPPER)
(Page 6)
3-4. MAIN ASSY
(Page 7)
3-5. (ION) STORAGE
BATTERY ASSY
(Page 8)
3-8. FRAME
(Page 9)
3-9. MAIN BOARD, INK (INDICATION) ELEMENT ASSY (IIE1)
(Page 10)
Note: Follow the disassembly procedure in the numerical order shown below.
3-2.
ORNAMENTAL PLATE (UPPER) ASSY, PLATE (CASE_UPPER)
Note: When peeling off adhesive sheet,
Remove while moving ornamental plate (upper) assy
in the direction of the arrow.
6
SECTION 3
DISASSEMBLY
can be performed in any order.
, the next process can not be performed.
3-3. ORNAMENTAL PLATE
(LOWER) ASSY
(Page 7)
3-6. SLOT FLEXIBLE
BOARD
(Page 8)
be sure to exchange it for new adhesive sheet.
adhesive sheet (C)
plate (case_upper)
adhesive sheet (B)
two screws (M1.4)
3-7. CONNECT FLEXIBLE
BOARD
(Page 9)
claw
adhesive sheet (C)
plate (case_upper)
adhesive sheet (B)
The upper part of the back side