3-7.
CONNECT FLEXIBLE BOARD
connector (CN901)
upper side
main assy
back side
3-8.
FRAME
compression spring
Note: Note the loss
because it is likely to dash out
when it removes.
shaft (spring)
Note: Note the loss
because it is likely to dash out
when it removes.
adhesive sheet (A)
Note: When peeling off adhesive sheet,
be sure to exchange it for new adhesive sheet.
two adhesive sheets (B)
Note: When peeling off adhesive sheet,
be sure to exchange it for new adhesive sheet.
spacer (CON_USB)
lower side
frame
two screws (M1.4)
CONNECT FLEXIBLE board
adhesive sheet (D)
Note: When peeling off adhesive sheet,
be sure to exchange it for new adhesive sheet.
screw (M1.4)
PRS-505
nut plate
Note: Note the loss.
9