Table of Contents
Advertisement
Removing a PC Card
Press the eject button on the left side of PC
card slot with the stylus as shown by the
arrow, and pull out the PC card while
holding onto the end of the PC card
removal tape.
Inserting a PC Card (When Using the Paper Holder)
Check the names of the parts of the Paper Holder before beginning work.
Part B
Part D
1. Check that the power is off. If the power is on, always make sure to turn it off by
pressing the power key.
2. Spread apart both ends of Part A of the
Paper Holder (
the Handheld Printer Terminal (
then remove Part C and Part D (
• Remove Part C and Part D using an
ordinary screwdriver as shown in the
illustration.
) and remove it from
1
), and
2
).
3
Part C
Part A
PC card cushion
Screws (4)
1
C
3
1
2
D
A
3
E-69
Advertisement
Table of Contents
