Specifications; Printing Specification; Paper Specification - Casio UP-360 Service Manual

1. SPECIFICATIONS

1-1. PRINTING SPECIFICATION

Model NO. of Printer Mechanism:
Printing Method:
Dot pitch:
Printing Speed:
Printing width:
Character structure:
Printing Columns:
Character Size:
Feed Speed:
Interface:
Input buffer:
Command:
Paper Width & Diameter:
Thermal head life:
Cutting method: *2
Auto cutter life:
Operating time of auto cutter:
Operating temperature:
Storage temperature:
Humidity:
Dimension:
Transfer speed:
Supply voltage in standby:
Mean voltage:
Power Consumption:
Weight:
*1 Manufactured by SIIP&S Inc. (Former name: Seiko Instruments Inc.)
*2 CAUTION: Paper must be fed 3 mm after cutting to prevent paper jam.
*3 These values vary according to environmental temperature when printed font A(12 x 24) with a rolling pattern.

1-2. PAPER SPECIFICATION

Paper Width:
Paper roll size:
Specified paper:
Paper roll spool diameter: Inside
NOTE:The end of the paper roll must be free to come off the spool when finished. It must not be adhesively
attached or attached in another semi-permanent manner.
LTPF347A-C576 *1
Direct Line Thermal
8 dot / mm
210 mm per second (Max.)
72mm / 576 dots
8 x 16 (font B)
69 columns / line
1.00 x 2.00
220 mm per second
RS232C (serial)
8k bytes
ESC / POS compliant
80 mm (W) x 80 mm Dia. Max.
100 Million Pulses / 100 km or more
ACUF324A
Partial cut(one point left uncut) *2
500,000 cuts
600 msec max/cycle
0 °C ~ 40 °C
-20 °C ~ 50 °C
80 %
145 mm (W) x 193.2 mm (L) x 120.1 mm (H)
Max 38.4 kBps
24V DC / 100mA
Approx. 1.3 A *3
Approx. 4 W *3
1.1kg
79.5 ± 0.5mm (3.13 ± 0.02")
Roll diameter:
Take-up paper roll width:
Specified thermal roll paper:
[Original paper:TF50KS-E2C Nippon Paper Industries Co., Ltd.]
Packaged roll paper:
[Original paper:PD160R-N (Oji Paper Mfg. Co., Ltd.)]
In Japan: Nakagawa Manufacturing Co., Ltd.
In U.S.A: Nakagawa Mfg. (U.S.A.) Inc.
In Europe: Nakagawa Mfg. (Europe) GmbH
In Southeast Asia: N.A.K. Mfg. (Malaysia) SDN BHD
*The following paper can be used instead of the paper above:
Original paper: HP220AB1 (Mitsubishi Paper Mills Ltd.)
12 mm (0.47")
Outside 18 mm (0.71")
— 1 —
12 x 24 (font A)
46 columns / line
1.50 x 3.00
Maximum 80 mm (3.15")
80 + 0.5/-1.0mm (3.15 + 0.02/-0.04")
NTP080-80