Electrolux U26227 Instruction Book page 10

Instructions for the Installer
Engineers technical data
Heating elements Ratings
Rapid front left Hotplate Ø 180 mm
Normal back left Hotplate Ø 145 mm
Rapid front right Hotplate Ø 145 mm
Normal back right Hotplate Ø 180 mm
Total rating
Cut out dimensions
Width:
Depth:
Thickness:
Important safety requirements
This hob must be installed in accordance with the IEE
Wiring Regulations (Current Edition).
Detailed recommendations are contained in the following
British Standards Codes Of Practice: B.S. 6172/ B.S.
5440, Par. 2 and B.S. 6891 Current Editions.
Location
This hob has been registered as a "Class X" appliance
according to Fire Risk Regulations. Minimum distances
detailed below must be observed. The hob may be located
in a kitchen, a kitchen/diner or bed sitting room, but not
in a bathroom or shower room.
Before making the cut out in the worktop ensure that
there is a minimum distance of 55 mm between the rear
edge of the hob and the wall. A minimum distance of 100
mm. must be left between the side edges of the hob and
any adjacent cabinets or walls.
The minimum distance combustible material can be fitted
above the hob in line with the edges of the hob is 400
mm. If it is fitted below 400 mm a space of 50 mm must
be allowed from the edges of the hob.
The minimum distance combustible material can be fitted
directly above the hob is 700 mm.
1 0
Overall dimensions
2090 W
Width:
1040 W
Depth:
1570 W
1570 W
6270 W
550 mm
470 mm
30 mm
INSTALLATION GUIDANCE INSTRUCTIONS
CLEARANCES REQUIRED
WHEN FITTING THE HOB
WITHOUT A COOKER HOOD ABOVE
700 mm
400 mm
FO 0812
INSTALLATION GUIDANCE INSTRUCTIONS
CLEARANCES REQUIRED
WHEN FITTING THE HOB
WITH A COOKER HOOD ABOVE
650 mm
400 mm
FO 0813
580 mm
500 mm
400 mm
400 mm