USINg THE CLOCK
Your scanner's clock displays whenever you turn off the radio functions. It can
also be used as a standard alarm clock.
SETTINg THE CURRENT TIME
Follow the steps to set the current time:
Move the slide switch to Clock Set. The hour
1.
digits flash.
2.
Press ▲ or ▼ to change the hour by one hour
increments or press the number keys to select
the present hour. Then press E/PgM to set the
hour. The minutes digits flash.
3.
Press ▲ or ▼ to change the minute setting by one minute or press the
appropriate number keys to enter the minutes. The seconds reset to 00.
Press E/PgM,
4.
Press ▲ or ▼ to move from AM to PM and back. Make your selection,
and then move the slide switch to Clock. The scanner exits the clock
setting mode.
# Seconds resets to zero (0) when you reset the time.
SETTINg THE ALARM TIME
Follow these steps to set the alarm time:
1.
Move the slide switch to Alarm Set. The
hours digits flash.
2.
Press ▲ or ▼ to change the hour by one hour
increments or press the number keys to select
the present hour. Then press E/PgM to set the
hour. The minutes digits flash.
3.
Press ▲ or ▼ to change the minute setting by one minute or press the
appropriate number keys to enter the minutes. Press E/PgM to set the
minutes. The
4.
Press ▲ or ▼ to move from AM to PM and back. Press E/PgM to make
your selection. To lock in the alarm time, move the slide switch
to Clock.
To have the BC345CRS alert you at the preset time,
slide Off/Radio/Tone to either Radio or Tone. If you
set the selector to Radio, the alarm will sound with the
selected audio source (AM/FM, Scanner, or Weather).
If you set the selector to Tone, the scanner will sound
a tone at the preset time. To silence the alarm, slide
Off/Radio/Tone to Off. If you do not turn off the
flashes.
A M / P M
display icon flashes.
A M / P M
L
L
L
19