Power Off - Pioneer DVR-660H-S - 250GB HDD Multizoned DVR Operating Instructions Manual

Recording
As you move the cursor around the grid, an
arrow stretches from the start time to the
current cursor position, representing the
length of the recording. A recording of up to
six hours can be set.
8 Set the end time.
ENTER
9 Select 'Yes' to set the timer
recording and exit, or 'No' to go back to
the Easy Timer Recording screen.
• You can check the timer recording
details you just set from the main timer
recording screen (see Setting a manual
timer recording on page 42).
Timer recording using the VCR
Plus+ programming system
This system makes programming timer
recordings very simple. Most TV guides
publish PlusCode programming numbers
with their programme details. If you want to
make a timer recording of a programme, you
just input the corresponding code. The date,
start, stop and channel settings are made
automatically. All you have to do is tell the
recorder the recording mode, and whether
it's a once-only recording or a regular
recording.
1 Press 'VCR Plus+' to display the VCR
Plus+ programme screen.
You can also access this screen from the
Home Menu (press HOME MENU, select
Timer Recording, then VCR Plus+).
PlusCode#
1 2
4 5
7 8
0
• Use the number buttons to enter the
PlusCode number. (To clear the last digit
entered, press CLEAR.)
3
6
Cancel
9
Details
Clear Enter
• You can also use the ///
buttons to select digits from the on-
screen display.
2 After making the settings, select
'Enter' and press ENTER.
The timer recording screen appears with the
timer programme you just set.
3 Confirm that the settings are correct.
If the channel number isn't displayed, use
the / buttons to highlight CH, then use
the / buttons to set the correct channel
number.
• If the channel number is set, but
incorrectly, set up the guide channel
(see VCR Plus+ CH Setting on page 114).
4 Select 'Store Programme' to finish.
• Other options in the same menu panel
allow you to name the programme, and
change the recording destination and/or
recording mode.
Checking/editing timer recording
settings
You can check and/or edit the timer
recording settings made by the VCR Plus+
system by selecting Details from the
PlusCode# setting screen.
ENTER
1 Select 'Details' from the
PlusCode# setting screen.
The Timer Programme Set screen appears,
filled out with the timer recording details.
2 Check and edit the fields as
necessary.
See Setting a manual timer recording below
for more on this.
ENTER
3 Select 'Store Programme' to
save the timer programme and exit.
VCR Plus+ programming with the

power off

You can enter a PlusCode programming
number when the recorder is in standby.
05
41
En