Pioneer DVR-660H-S - 250GB HDD Multizoned DVR Operating Instructions Manual page 133

Additional information
Problem
HDMI Control does not
respond
Remedy
• Verify that the HDMI cable is firmly connected (page 22).
• Check whether HDMI Control is set to On for this unit and the device
connected to this unit. For more information, refer to the operating
instructions of your Flat Panel TV or AV system.
• Depending on the type of Flat Panel TV, some HDMI input terminals
do not support the HDMI Control function. For details, see the
operating instructions supplied with your Flat Panel TV.
• HDMI Control may not operate properly if you do not use a High
Speed HDMI cable.
• This function may not work properly if you have multiple recorders
connected to a single Flat Panel TV or AV system. For more
information refer to the operating instructions of your Flat Panel TV or
AV system.
• Controls may not function properly in certain situations, such as
immediately after you have connect an HDMI cable, turn this unit's
power off or remove the power cable for this unit or the connected
component. If you experience any problems, set HDMI Control to On
for all connected units, and then display the pictures stored on this
unit on your Flat Panel TV to improve the situations.
• Check whether the connected component supports HDMI Control or
not.
• Certain functions are not supported on with Flat Panel TVs or AV
system.
• We cannot guarantee this unit will work with HDMI Control-
compatible components other than those made by Pioneer. When
using HDMI Control-compatible components manufactured by
companies other than Pioneer, set the HDMI Control to Off
(page 120).
17
133
En