Table of Contents
Advertisement
Searching the PTY
1. Select PTY search mode by pressing the PTY
button.
The PTY indicator appears on the Source Plate.
Each press of the PTY button changes the method in
the following order:
PTY Search = Frequency Search
Note:
• To search for the same PTY as the currently received broadcast station, perform step 3 only.
2. Select a PTY by pressing the 5/∞ button.
A station broadcasting a program with a different PTY
from the PTY of the currently received broadcast sta-
tion is selected.
3. Select a station by pressing the 2/3 button.
A station broadcasting a program with the same PTY
as the currently received broadcast station is selected.
Note:
• If a PTY code of zero is received from a station, "NONE" will be displayed. This indicates
that the station has not defined its program contents.
• The program of some stations may differ from that indicated by the transmitted PTY.
• If no station broadcasting the selected programming type is found, "NOT FOUND" is dis-
played for about 2 seconds, and the tuner returns to the original station.
• You can also switch the station selection mode when in the Function Menu Seek Select mode.
(See page 22.)
25
Advertisement
Table of Contents
