2
Component Remove/Replacement
This chapter provides procedures for removing and replacing the components in the J6700
workstations.
Chapter Overview
Here are the main sections in this chapter:
• Front Bezel and Top Panel
• Bezel-Label Strip
• LCD Panel
• Hard Disk Drives
• Hard disk Drive Backplane
• CD ROM Drive
• Memory DIMMs
• Power Supply
• PCI Cage
• PCI Backplane
• Speaker
• System Board
• Real-Time Clock
WARNING
For most of the removal and replacement procedures in this chapter,
you must power off the workstation and unplug the workstation
power cord from the AC power outlet. The exceptions to this are the
removal and replacement of DIMMs and the PCI cage. For these you
only need to power off the workstation.
NOTE
To maintain FCC/EMI compliance, verify that all covers are replaced and
that all screws are properly seated.
9