If the server has a RAID configuration that uses the SAS/SATA controller card with
integrated RAID (hot-swap SATA or SAS models only) or the integrated Serial ATA
controller with HostRAID support (simple-swap SATA models only) and you have
installed or removed a hard disk drive, you might have to reconfigure the disk
arrays. See the RAID documentation on the IBM ServeRAID 8i (Adaptec HostRAID)
Support CD for information about reconfiguring the disk arrays.
If the server has an optional RAID adapter and you have installed or removed a
hard disk drive, see the documentation that comes with the RAID adapter for
information about reconfiguring the disk arrays.
For information about configuring the integrated Gigabit Ethernet controller, see
"Configuring the Gigabit Ethernet controllers" on page 48.
32
IBM xSeries 306m Types 8849 and 8491: User's Guide