IBM 306m - eServer xSeries - 8849 User Manual page 22

User guide
Hide thumbs Also See for 306m - eServer xSeries - 8849:
Table of Contents

Advertisement

Statement 5:
CAUTION:
The power control button on the device and the power switch on the power
supply do not turn off the electrical current supplied to the device. The device
also might have more than one power cord. To remove all electrical current
from the device, ensure that all power cords are disconnected from the power
source.
The server can be turned off in any of the following ways:
v You can turn off the server from the operating system, if your operating system
v You can press the power-control button to start an orderly shutdown of the
v If the operating system stops functioning, you can press and hold the
v If the server is connected to an Advanced System Management interconnect
v If an optional Remote Supervisor Adapter II is installed in the server, the server
v The integrated system management processor can turn off the server as an
v You can turn off the server through a request from the service processor.
10
IBM xSeries 306m Types 8849 and 8491: User's Guide
supports this feature. After an orderly shutdown of the operating system, the
server will be turned off automatically.
operating system and turn off the server, if your operating system supports this
feature.
power-control button for more than 4 seconds to turn off the server.
network that contains at least one server with an optional Remote Supervisor
Adapter or Remote Supervisor Adapter II installed, the server can be turned off
from the Remote Supervisor Adapter or Remote Supervisor Adapter II user
interface.
can be turned off from the Remote Supervisor Adapter II user interface.
automatic response to a critical system failure.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

8491X 306m series8849

Table of Contents