Nserting Aause In The Sequence; Hanging Or; Stored Numbers; T O Review - GE 210952 - 2.4GHz Cordless Phone User Manual

3. Press the MEM/mem button to save. You will hear a confirmation tone.
NOTE: If the redial number has more than an 20 digits, it cannot be
stored in memory.
I P
NSERTING A
If a pause is needed to wait for a dial tone press the # pause button on
the base or handset touch-tone pad to insert a delay in dialing sequence
of a stored telephone number (for example, after you dial 9 for an
outside line, or wait for a computer access tone.) Each pause counts as
one digit and shows as "P" in the dialing sequence.
R , C
EVIEWING

HANGING OR

T R :
O EVIEW
1. Make sure the phone is OFF (not in talkmode).
2. Press MEM/mem button on the base or handset.
3. Press the CID/vol (
( or ) button on the base to scroll through the stored numbers. Or
use the touch- tone pad on your handset or base to enter the memory
location number.
T C :
O HANGE
Follow the steps under Storing a Name and Number in Memory except
replace the stored name or number with new information.
D
AUSE IN THE
D
SELECT MEMORY
or ) button on the handset or CID/messages
S
IALING EQUENCE
S
ELETING TORED
MEMO
01-50
0 3
MEMO
317 - 123 - 4567
PETER CHAN
N
UMBERS
--
37