Default - GE 210952 - 2.4GHz Cordless Phone User Manual

5. Use the CID/vol (
setting is 1YES .
6. Press the mute/program button to confirm the deregistration. HANDSET
# DEREGISTERED followed by HANDSET NEEDS REGISTRATION shows
in the display.
NOTE: If one or more handsets becomes lost, you should de-register all
handsets (globally) to ensure proper system operation.
1. Press and hold the base page/int button on the base until the charge/page
indicator flashes.
2. Press and hold the base page/int button again until the charge/page
indicator flashes rapidly.
3. Press and release the page/int button on the base. The charge/page
indicator stops blinking, and the base display shows ALL HANDSETS
DEREGISTERED for five seconds and confirms all handsets are de-
registered. Then the base returns to standby mode, and each handset
displays HANDSET NEEDS REGISTRATION.
D
EFAULT
As you become familiar with this system, you may prefer to use the
system's original settings. Follow the steps to return to the factory settings.
MOVE NEAR TO
BASE
CONFIRM?
1YES
or ) button to scroll to 1YES or 2NO . The default
HANDSET #
DEREGISTERED
2NO
23