Inserting A Pause In The Sequence; Reviewing , Changing Or; Stored Numbers; T O Review - GE 21091 User Manual

6. Press the redial button to display the redial number.
7. Press the OK soft key again to confirm.
NOTE: If the redial number has more than an 24 digits, the redial number
cannot be stored in memory.
I P
NSERTING A
If a pause is needed to wait for a dial tone press the # pause button on
the touch-tone pad to insert a delay in dialing sequence of a stored
telephone number (for example, after you dial 9 for an outside line, or
wait for a computer access tone.) Each pause counts as one digit in the
dialing sequence.
R , C
EVIEWING HANGING OR
T R :
O EVIEW
1. Make sure the phone is OFF (not in TALK mode).
2. Press DIR soft key.
3. Press the cid/vol (
button on the base to scroll through the stored numbers. Or use the touch-
tone pad on your handset or base to enter the memory location number.
T C :
O HANGE
Use the same procedure to change a stored number as you do to store a
number except replace one stored phone number with a different one.
40
D
AUSE IN THE
D
NAME
HANDSET 1
MENU
or ) button on the handset or CID/messages (
EDIT
S
IALING EQUENCE
S
ELETING TORED
ANS DIR
0 3
MEMO
317 - 123 - 4567
PETER CHAN
DEL EXIT
N
UMBERS
or )