Page 1
21825 Digital Cordless Telephone With Dual Mode Caller ID User’s Guide Thomson Telecom 46, Quai Alphonse le Gallo, 92648 Boulogne Cedex , France is a trademark of General Electric company and is under license by Thomson Telecom, France. Model: CE21825GEX-A 00017022 (Rev.
Precautions of Use The quality of communication depends on the location and environment of the base and the handset. The 21825 must be kept away from sources of excessive heat (radiators, direct sunlight, etc.) and protected against vibrations and dust. Never allow your telephone to come into contact with water or other liquids or with aerosols.
Never dispose of batteries in a fire: the cell could explode. Check with local code for possible special disposal instruction. Installation Packaging Contents Model name: 21825 Solo Pack Duo Pack* Base stations Handsets...
CAUTION: Plug the adaptor to the socket outlet that near the equipment and shall be easily accessible. Use only the Thomson Telecom power supply that came with this unit. Using other power supplies may damage the unit. Connecting the charging station Insert the power plug in the socket on the rear side of the charging station.
Alphanumeric LCD display (7 segment, 10 segment display) Phone book for 40 entries with name and call number Extended redialing for 5 call numbers Microphone muting function Acoustic Low battery and range warning signals Key lock Key input tone on/off 10 incoming call ringing melodies Ringing volume control (5 levels and silent) DTMF/Pulse dialing...
LCD Display Battery icon Phone icon External call icon Internal call icon CLI icon No ring icon Mute icon Key lock icon Aerial icon ▲ / ▼ Up / Down arrow Voice mail waiting indicator (VMWI icon) Using the Handset Telephone Using the telephone When the handset is inserted in the station charging unit, it starts to charge automatically.
Press key to carry out the conversation. Press key to end the call. VMWI/LED bule LED in the base unit will flash when there are new voice message calls received. Icon turns on and the LCD display “Message” in the call log memory. This service need subscription to local operator and it supports the FSK CLI system only.
Delete: Press and hold “C” key two seconds to delete one or all the entries. Selection is made using key. Save: Press key to enter the subscribers in the phone book. Enter the name and press “Int/ok” key. Note: 1. The CALL LOG symbol and display indicator only disappear after browsing through all the entries.
Store Entries Press key until the PHONE BOOK menu appears and press “Int/ok” key. Press key to select “NEW ENTRY” and press “Int/ok” key. Enter number (max. 25 digits) and press “Int/ok” key when finished. Enter name (max. 10 characters) and press “Int/ok” key when finished.
Entering/Changing Handset Name It is possible to assign a name to each handset. This name is then displayed when the phone is in standby mode. Press key until the HANDSET menu appears and press “Int/ok” key. Press key to select the submenu and press “Int/ok”...
Press key until the BASE menu appears and press “Int/ok” key. Press key to select the required submenu and press “Int/ok” key. Enter the PIN (factory setting = 0000) and press “Int/ok” key. key to select the emergency number to be changed and change it.
Deregister HS If several handsets are registered on one base station, they can deregister each other mutually. The last handset can not be deregistered. Press key until the BASE menu appears and press “Int/ok” key. Press key to select the required submenu and press “Int/ok”...
Page 15
PROBLEMS CAUSES SOLUTIONS Registration not The battery is not Charge the battery for work. sufficiently charged. 14 hours. Handset and base Unplug and then plug in station were not the power adaptor. prepared for registration. No display. The battery has not Charge the battery or been charged.