Security Code; Announcement; R O A; Ecording The Nnouncement - GE 210952 - 2.4GHz Cordless Phone User Manual

S C
ECURITY ODE
You can access the answering system from a tone dialing telephone in
another (remote) location. The security code is required for remote access,
and it prevents unauthorized access to your answering system. You may
only change the security code at the base.
1. Use the touch-tone pad to enter your new 3-digit security code. For
example, press the 6, 2, and 8 number keys for security code 628. The
default security code is 123.
NOTE: If you want to re-enter the security code, enter the numbers again and
press the MUTE/program button. The new numbers replace the old numbers.
NOTE: Press the EXIT button to keep the current security code and return to
the standby mode.
2. Press the MUTE/program button. You will hear a confirmation tone, and
the new security code shows in the display, followed by
ANNOUNCEMENT DEFAULT .
A
NNOUNCEMENT
R
ECORDING THE
The outgoing announcement is heard by the caller when the answering
system answers the call. The default announcement is: " PLEASE LEAVE
YOUR MESSAGE AFTER THE TONE ." You may, however, choose to record
a personal outgoing announcement.
For best results when recording a personal announcement, you should
be about nine inches from the microphone and try to eliminate as much
background noise as possible.
14

SECURITY CODE

O A
UTGOING NNOUNCEMENT
628