Symantec Norton Antispam Personal Firewall and Systemwork - Norton Antispam, Personal Firewall User Manual page 17

Getting started 17
Activating your product
w
You must activate your product within the time period
specified by the alert or it will stop working.
You can activate your product from the Activation Needed
alert or from the Activation option on the Help menu.
Activation should take a few minutes.
To activate your product from the Activation Needed
alert
1 In the alert, click Activate Now.
2 Click OK.
3 In the Activation window, click Next.
4 In the Activation Successful window, click Finish.
To activate your product from the Help menu
1 At the top of the main window, click Help and
Support, and then click Activation.
2 In the Activation window, click Next.
3 In the Activation Successful window, click Finish.
If you have problems activating
If you cannot connect to the Symantec servers to activate
your product, first check to see if you have parental control
software, either installed or through your ISP, that might
be blocking the connection.
A connectivity problem may occur if you are using parental
control software. If you suspect that parental controls are
blocking the connection, configure the parental controls
so that they do not block the activation procedure. You will
need to log on to your parental control software as an
administrator, or log on to the Internet through your ISP
as an administrator to change your configuration.
If parental controls are not the problem, or if you cannot
reconfigure your parental controls to resolve the issue, you
can activate by phone.