Physical Characteristics; Ac Power Cord; Power Switch; Power Indicator - Sharp UP-V5500 Hardware Operation Manual

PHYSICAL CHARACTERISTICS

Front view
Operator Display (Touch Panel)
Clerk switch
Rear view
Internal Customer Display
(Optional)

AC power cord

Plug your terminal into a wall outlet that has a dedicated ground before using.

Power switch

Push the power switch to turn

Power indicator

If the terminal is not plugged in the power indicator LED does not lit.
Is the terminal plugged in, the power indicator LED lits ORANGE.
The terminal is now in "Stand-by" status.
Push the power switch to turn On, the power indicator LED lits GREEN.
The power indicator will remain on even while the display's backlight is off.

Clerk key body

Clerk key body is used with optional contactless clerk key.
Contactless clerk key
Use the contactless clerk keys at the clerk key body
.
On, after the terminal has been plugged in.
Magnetic Card Reader
(Optional)
Power indicator LED
HDD activity LED
Network LED
Side cover
Power Switch
(Located at the bottom)
5