Sewing Shape - Brother RH-9800 Specifications

Device for each sub-class
RH− − − − 9800− − − −
Upper
thread
trimmer
00
01
Standard bar tacking
02
/ eyelet buttonhole
03
with taper bar
04
05
12
Straight bar tacking
15
Eyelet button hole
52
with taper bar
55
(with fly indexer)
*1 If using the lower thread trimmer (short type), please specify the buttonhole length when ordering.
There is 10 mm of difference in the knife installation positions between L1 − L4 and L5 − L7.
*2 The upper thread nipper cannot be used in conjunction with the upper gimp guide.
*3 The special lapel cutting device can be used only when the feed bracket is set to the front position.

Sewing shape

Eyelet buttonhole
Eyelet Eyelet
buttonhole Buttonhole
with taper
RH-9800 2/17
Lower thread Upper
trimmer thread
nipper*2
Long Short
− − Option*2
− Option*2
− *1 Option
− −
−
− *1
− *1 Option
− *1
− *1 Option
− *1
With straight With round
bar tack bar tack
2002.10
Fly indexer Upper Circular
gimp guide stitching
buttonhole
− Option*2 Option
− Option*2 Option
Option −
− −
− −
Option −
− −
− −
−
−
Straight buttonhole
Straight Straight
buttonhole buttonhole with
taper
Round bar Special lapel
tacking set cutting device
set
Option Option *3
Option Option *3
− − −
− − −
− − −
− − −
− − −
− − −
− − −
− − −
With straight With round bar
bar tack tack