Set To Set Communication P - Sharp EL-9900 Operation Manual

S
et to set communication
Transfer data between two EL-9900 calculators using the communication cable (CE-451L).
CE-451L
EL-9900
Communication Procedure
Plug the cable into both calculators.
1
Turn power on.
2
Receiver
3
( or )
4
( or )
Sender
5
( or )
6
( or )
(Communication cable)
Communication cable
Specified LINK.
Select LINK/RECEIVE.
Specified LINK.
Select LINK/SEND.
CE-451L
7
8
9
List of the SEND menu
A SELECT ....................... Sends files individually as described below.
01 ALL ............................ Selects and displays all files.
02 List ............................. Selects and displays all list files.
03 Matrix ........................ Selects and displays all matrix files.
04 Graph Eqn .................. Selects and displays all graph equations.
05 Solver Eqn ................. Selects and displays all solver equations.
06 Program ..................... Selects and displays all program files.
07 G_Data ....................... Selects and displays all graph data files.
08 L_Data ....................... Selects and displays all list data files.
09 Picture ....................... Selects and displays all picture data files.
10 Slide .......................... Selects and displays all self-made slide shows.
11 A~Z, Ø ........................ Selects and displays all fixed memory of A to Z, and Ø
B BACKUP ...................... Menu to send all file data. Use this feature to send the
EL-9900
Select SEND/ALL.
List of sendable data will
appear on screen.
Select 'LI', 'YI'
mark desired data to be
*
sent.
Execute Sending function.
entire content.
]
]
11