Set To Set Communication P - Sharp EL-9400 Operation Manual

S
et to set communication
Transfer data between two EL-9450/9400 calculators using the communication cable
(CE-450L).
EL-9450/9400
Communication Procedure
Plug the cable into both calculators.
1
Turn power on.
2
Receiver
3
( or )
4
( or )
2
Sender
5
( or )
6
( or )
1
CE-450L
Communication cable
Specified LINK.
Select LINK/RECEIVE.
Specified LINK.
Select LINK/SEND.
EL-9450/9400
7
8
9
List of the SEND menu
A SELECT ....................... Sends files individually as described below.
1 ALL .............................. Selects and displays all files.
2 List ............................... Selects and displays all list files.
3 GraphEq ....................... Selects and displays all graph equations.
4 Program ....................... Selects and displays all program files.
5 G_Data ......................... Selects and displays all graph data files.
6 L_Data ......................... Selects and displays all list data files.
7 Picture ......................... Selects and displays all picture data files.
8 A~Z, Ø .......................... Selects and displays all fixed memory of A to Z, and Ø
B BACKUP ...................... Menu to send all file data. Use this
feature to send the entire content.
Select SEND/ALL.
]
List of sendable data will
appear on screen.
Select 'LI', 'YI'
]
mark desired data to be
*
sent.
Execute Sending function.
15