Cisco 2431 - IAD Router Hardware Installation Manual page 72

Wiring the DC-Input Power Source
Figure C-10
Step 7 Repeat Steps 4 and 5 for the remaining three DC-input power source wires.
completed wiring of a terminal block plug.
Figure C-11
1 Return (positive) Feed A
2 Supply (negative) Feed A
Step 8 Insert the terminal block plug in the terminal block header on the front panel of the switch.
(See Figure
Cisco ME 2400 Ethernet Access Switch Hardware Installation Guide
C-8
Torquing the Terminal-Block Captive Screws
Completed Wiring of Terminal Block Plug
C-12).
Torque to 4.5 lbf-in. (72 ozf-in.)
1
2
3
4
3 Return (positive) Feed B
4 Supply (negative) Feed B
Appendix C Connecting to DC Power
Figure C-11 shows the
OL-7678-01