Picture Menu Options - Haier LY22R1CBW1 User Manual

Menu Operations
NOTE: Using your remote control to navigate in the on-screen menus.
The on-screen menus shown in this manual may be different from those on your TV. These
are example to illustrate your TVs operation.

Picture Menu Options

Picture quality can be adjusted for any input separately .
The picture quality on the screen can be adjusted as follows:
1. Press MENU button and
2. Press button to enter the picture menu and go up and down to select
/
the desired option .
3.Press / button to increase and decrease the level to match your preference .
4. Repeat step 2 and step 3 until desired picture quality has been achieved .
Functions:
Video Mode: Press
Contrast : Used to set the contrast balance of the picture.
Brightness : Used to set the brightness level of the picture.
Colour : Press
Sharpness : By increasing the level, it will show cleaner and clearer images
and by decreasing the level, it will make picture smoother.
Tint(Only available in NTSC): Set the colour tone of the picture.
Colour Temperature : Press to select the colour temperature from Normal/Cool/
Warm .
Noise Reduction: Adjust the quality of the picture by selecting Off,Low,
Middle,High.
PC Adjust (can be adjust only in PC mode and there is PC signal): Press OK button
to enter the submenu.
/ until the picture menu appears on the screen.
/ to set the picture mode .
/ to adjust the colour saturation of the picture.
Press
Auto Sync
H.Position
V.Position
Size
Phase
EXIT
/ to adjust the value.
PICTURE
MENU
OK
50
50
0
50