Closing The Chassis - Cisco 1721 - VPN Security Router Bundle Hardware Installation Manual

Appendix C Installing and Upgrading Memory and Virtual Private Network Modules

Closing the Chassis

Step 1
Step 2
Step 3
78-13834-02
After installing memory or a VPN module on the motherboard, close the chassis
by following these steps:
If you disconnected the fan from the motherboard as described in the
the Chassis" section, reconnect the fan cable to the connector labeled FAN on the
motherboard.
Locate the posts that protrude from the inside of the chassis cover, and locate the
corresponding openings on the chassis bottom.
Line up the posts with the corresponding openings, as shown in
carefully slide the posts into the openings, taking care not to damage the router
motherboard with the posts.
Cisco 1721 Router Hardware Installation Guide
Closing the Chassis
"Opening
Figure C-8, and
C-9