Isdn Bri Switch Types - Cisco 1721 - VPN Security Router Bundle Hardware Installation Manual

ISDN BRI Switch Types

ISDN BRI Switch Types
Cisco 1721 Router Hardware Installation Guide
D-2
If the router is going to be the only device attached to the ISDN BRI line, ask
•
for point-to-point service and a data-only line.
If you will be connecting another ISDN device (such as an ISDN telephone)
•
to the ISDN BRI line, ask for point-to-multipoint service (subaddressing is
required) and a voice-and-data line.
ISDN BRI supports a variety of service provider switches.
geographic area, the ISDN switch types supported by a Cisco 1721 router
ISDN BRI interface. Use the isdn switch-type command followed by the
corresponding keyword. You must reboot the router after you enter this command
in order for the change to take effect.
Table D-1 ISDN Switch Types Supported by the Cisco 1721 Router
Switch Type
Australia
TS013 switches
Europe
German 1TR6 switches
Norway NET3 switches (phase 1)
NET3 ISDN switches (UK and others)
VN2 ISDN switches
VN3 ISDN switches
Japan
NTT switches
North America
Basic 5ESS switches
NT DMS-100 and 5ESS custom switches
National ISDN-1(NI1) or switches
Appendix D Ordering and Configuring an ISDN Line
Table D-1
Keyword
basic-ts013
basic-1tr6
basic-nwnet3
basic-net3
vn2
vn3
ntt
basic-5ess
basic-dms100
basic-ni
lists, by
78-13834-02