Remove Flash Memory; About Mp3/Wma File Of Flash Memory; Ipod/Iphone (Optional) (Cde-141 Only); Connecting An Ipod/Iphone - Alpine CDE-141 Quick Reference Manual

Remove Flash Memory

1
Carefully, pull out the Flash Memory Device from the USB
cable or the USB Port.
2
Close the cover of the USB Port.
Notes
• Change to a source other than the Flash Memory mode, then remove
the Flash Memory Device. If Flash Memory is removed in the Flash
Memory mode, data may be damaged.
• When removing Flash Memory, pull it out straight.
• If sound is not output or Flash Memory is not recognized even when
connected, remove the Flash Memory Device once, and then connect it
again.
• Route the USB cable away from other cables, etc.
• After removing the Flash Memory, close the cover of the USB Port to
prevent dust or foreign objects from entering and causing a
malfunction.

About MP3/WMA File of Flash Memory

Playing back MP3/WMA
MP3/WMA files are prepared, and then stored to a Flash Memory
Device. This unit can recognise at most 100 folders and 100 files per
folder stored in Flash Memory. Playback may not be performed if a Flash
Memory Device exceeds the limitations described above.
Do not make a file's playback time more than 1 hour.
Media supported
Only MP3/WMA files are supported. Other media types are ignored.
Corresponding File Systems
This device supports FAT 12/16/32 for Flash Memory formats.
20
-EN
iPod/iPhone (optional)
(CDE-141 only)
SOURCE/ 
Rotary encoder
/ENTER/OPTION
/ II 
 
BAND/ABC SEARCH

Connecting an iPod/iPhone

An iPod/iPhone can be connected to this unit by using the Interface
cable for iPod (included with iPod). When an iPod/iPhone is connected
to this unit, you can choose to control the iPod/iPhone using its own
controls or by the head unit controls. For details, refer to "Setting the
iPod Control" on page 21.
These instructions refer to controlling the iPod/iPhone from this Head
Unit (HU) only. Make sure iPod Control is set to HU MODE (HEAD
UNIT). Refer to "Setting the iPod Control" on page 21. Refer to the
iPod/iPhone manual for operations using the iPod/iPhone.
This unit
iPod/iPhone
(sold separately)
Note
• Internet and telephone functions of iPod touch or iPhone, etc., can also
be used when connecting to the unit. However, using these functions
will stop or pause the playing songs. At this time do not operate the unit
to avoid a malfunction.
About iPod/iPhone models usable with this unit
• Confirmed devices regarding Made for iPod. Correct function of
earlier versions cannot be guaranteed.
iPod touch (4th generation): Ver.5.1.1
iPod nano (6th generation): Ver.1.2
iPod touch (3rd generation): Ver.5.1.1
iPod nano (5th generation): Ver.1.0.2
iPod classic (160 GB) (Late 2009): Ver.2.0.4
iPod touch (2nd generation): Ver.4.2.1
iPod nano (4th generation): Ver.1.0.4

1 5

2 4
Preset buttons
(1 through 6)
USB Connection Terminal
Included with iPod/iPhone